Oil resistant PVC insulated & sheathed Control flex Screened cable

Oil resistant PVC insulated & sheathed Control flex Screened cable
Construction:
Conductor: bare copper strands
Insulation: special heat resistant PVC
Colour code: black cores with consecutive numbers
Stranding: in layers
with PETP foil over the outer layer
Screen: tinned copper braiding
Sheath material: special heat resistant PVC
Sheath colour: grey (RAL 7000)
Technical data
Nominal voltage: DIN VDE UL/CSA  Uo/U 300/500 V 600 V
Testing voltage U: 3000 V   core/screen: 1000 V
Min. bending radius fixed laying: 5 x d   flexible application: 10 x d
Radiation resistance: 8 x 107 cJ/kg
Temperature range: DIN VDE UL/CSA   fixed laying: -40/+90 °C up to +105°C
flexible application: +5/+90 °C up to +105°C    short time use: +105 °C
Fire performance: flame retardant and self-extinguishing acc. to
IEC 60332-1-2 + EN 60332-1-2,    UL VW-1, CSA FT1 FT2
Temperature range up to + 105°C

Oil resistant cable
www.anytecable.com

Anyte LAN CABLE UTP Cat6

LAN CABLE UTP Cat6

The twisted pair lan cable cat6 used for digital communications , applied in buildings cabling system between patch panels and the output of communication.also used in Residential cabling system between the patch panel and output of communication ,meet the 100MHz data communication. Comply with color coding standard of ANSI/TIA/EIA-568-B

Conductor:Solid or stranded with 7 pieces (tinned) copper wire
Meet the UL444 standard HDPE polyethylene insulated
Two-cores twisted pair, total of four pairs,filled by plastic cross
Special aluminum mylar 100% coverage
drain wire:Single or stranded fine (tin plated) copper wires
(Tinned) copper braid or spiral shielding , coverage rate of 85%
Special PVC outer sheath, or a higher standard of low smoke zero halogen flame retardant outer sheath (optional materials can be customized colors)

Comply with standard UL758,UL1581,UL444,TIA/EIA-568,CSA C22.2, ISO/IEC 11801
Transmission frequency of 100MHz, and support for duplex applications
Comply with RoHS standards
Pass UL VW-1 & CSA FT1 vertical flame test

Operating voltage: 30V
Operating temperature range:
Movable Installation: - 5 ° C to +80 ° C fixed installation: -40 ° C to +80 ° C
Flammability rating: IEC60332-1 CM
DC Resistance at 20 ℃ (Ω / KM) <93.8
Operating Temperature 70 ℃
68% of the propagation velocity
Impedance (ohms) 100 ± 15
Flame Propagation Test to IEC 60332 Part 1 (LSOH) Flame Propagation Test to IEC 60332 Part 1 and Part III (LSFROH) halogen acid gas emissions in line with the IEC 60754, Part 1
Smoke emissions tested comply with IEC 61034

The reason for ageing of cable

Wire and cable insulation aging is the most direct reason for lower breakdown.Guide min insulation lower mean a lot, according to the practical operation experience, is classified into the following several ways.

Anyte wire cable

1) the external force damage.Now quite a number of cable fault are caused by mechanical damage.Such as: non-standard cable laying installation construction, easy to cause mechanical damage;Sometimes if the injury is not serious, months or even years to lead to injury completely breakdown failure formation, sometimes destroyed fault may occur, directly affect the safety in production.
2) insulation be affected with damp be affected with damp.It is also very common.Such as: cable joint production of unqualified and do joint in humid climate conditions, can make the joint water or mixed with water vapor, time is long gradually damage the insulation of the cable strength and cause failure.
3) the chemical etching.Protective layer due to the long suffering chemical corrosion and electrochemical corrosion, the coating failure, the insulation is reduced, can also lead to cable fault.
4) long-term overload operation.Overload for a long time running, the high temperature will accelerate aging of the insulation, and insulation breakdown.Especially in hot summer, the temperature of the cable often resulted in the breakdown of cable insulation is weak at first, so in the summer, the failure of the cable is much more special.
But Anytekabel Co.,Ltd., the production of wire and cable, cable from the selection of raw materials or are strictly controlled in the process of production, control, makes every effort to do wire, cable, good let you rest assured brand!

Introduction of the flexible cable

Flexible cable - is drag chain movement system, the power transmission material, cable of choice for signal transmission carrier, also known as: drag chain cable, towing cable, mobile cable, robot cable, etc.
Flexible cable conductor structure mainly according to DIN VDE and IEC 228 standard 0295 stranded copper wire structure, sheathed with low viscosity, more Flexible wear-resisting material, to slow the cable wear rate in the continuous moving back and forth.
Flexible cable according to the functional division is mainly divided into: sensor/encoder cable, servo motor cable, robots cable, clean cable, drag chain cable system.

Anytekabel Co.,Ltd.

According to the model can be roughly divided into the following categories:
The flexible control cable
1. PVC sheathed flexible control drag chain cable, flame retardant CC101 bending radius: 8x
2. PVC sheathed flexible shielding control drag chain cable, flame retardant CC111 bending radius: 10x
3. PVC sheathed flexible control cable drag chain cable, flame retardant CC120 bending radius: 5x
4. PVC sheathed flexible shielding control drag chain cable, flame retardant CC121 bending radius: 8x
5. PUR sheath flexible control drag chain cable, oil resistant, acid and alkali resistant, hydrolysis resistance, uv resistance, low temperature resistant, wear resistant, flame retardant CC127 bending radius: 8x
6. PUR sheath flexible control shielded drag chain cable, oil resistant, acid and alkali resistant, hydrolysis resistance, uv resistance, low temperature resistant, wear resistant, flame retardant CC117 bending radius: 10x
7. steel wire braided flexible control drag chain cable, uv protection, good low temperature resistance, wear resistance, CC158 bending radius: 10x
8. PETP outer sheath flexible control drag chain cable, oil resistant, acid and alkali resistant, hydrolysis resistance, uv resistance, low temperature resistant, wear resistant, flame retardant CC160 bending radius: 5x
9. PETP sheathed flexible control shielded drag chain cable, oil resistant, acid and alkali resistant, hydrolysis resistance, uv resistance, low temperature resistant, wear resistant, flame retardant CC133 bending radius: 10x
Flexible power cable
10. PVC sheathed flexible power drag chain cable, flame retardant CC305 bending radius: 8x
11. PVC sheathed outside the shield flexible power drag chain cable, flame retardant CC336 bending radius: 10x
12. PETP outer sheath flexible shield drag chain power cable, oil resistant, acid and alkali resistant, hydrolysis resistance, uv resistance, low temperature resistant, wear resistant, flame retardant CC358 bending radius: 10x
13. PETP outer sheath flexible shield power drag chain cable, oil resistant, acid and alkali resistant, hydrolysis resistance, uv resistance, low temperature resistant, wear resistant, flame retardant CC371 bending radius: 8x
The flexible data/bus cable
14. PVC sheathed flexible drag chain cable block data. CC41 bending radius: 8x
15. PUR outer sheath flexible shield data drag chain cable, oil resistant, acid and alkali resistant, hydrolysis resistance, uv resistance, low temperature resistant, wear resistant, flame retardant CC43 bending radius: 10x
16. PETP outer sheath flexible shield data drag chain cable, oil resistant, acid and alkali resistant, hydrolysis resistance, uv resistance, low temperature resistant, wear resistant, flame retardant CC46 bending radius: 10x
17. PETP drag chain outer sheath flexible shield data cable, oil resistant, acid and alkali resistant, hydrolysis resistance, uv resistance, low temperature resistant, wear resistant, flame retardant CC48 bending radius: 12x
Flexible servo cable
18. PUR outer sheath servo drag chain flexible shield cable, oil resistant, acid and alkali resistant, hydrolysis resistance, uv resistance, low temperature resistant, wear resistant, flame retardant CC46 bending radius: 10x

Use requirement and structure characteristics of elevator cable

Using characteristics
1. the cable should be free hanging before use, fully to back twist and the cable to strengthen the core should be fixed, sustain tension at the same time;
2. cable, rows should be in the running, cable with the elevator to move up and down, moving, bending is frequent, soft, flexible;
3. cable, vertical demands a certain tensile strength;
4. work environment with oil to fire, elevator cable requirement is secondary;
5. small diameter, light weight.

Structure characteristics
1. USES the 0.2mm round copper wire bundle heave, winding and the isolation between conductor and insulation layer, into a higher stranded cable when increase the soft cable, bending performance;
2. Increasing cable strengthening core cable, inherit the mechanical strain, strengthening core using materials such as nylon rope, wire rope, in order to increase the tensile strength of the cable;
3. YTF cable made by neoprene sheath, in order to improve the weatherability of the cable and don't delay flammability.

Anytekabel Co.,Ltd.(www.anytecable.com)